MENU
Rate this post

HOW TO USE A DRYWALL SANDER

BENEFITS OF THE DRYWALL SANDER

As with any DIY job, having the right tool makes all the difference. The drywall sander has been specifically designed to tackle those big plasterboard walls. Benefits include smooth finishing, high efficiency, dustless environment, light weight and long handle for high reach area even the roofing sanding polishing.

DP-700A Hand-held Drywall Sander

DP-700A Hand-held Drywall Sander

DP-3000 Long Handle Dustless Drywall Sander

DP-3000 Long Handle Dustless Drywall Sander

Larger surface area

The first thing you’ll notice about your drywall sander is the large, wide base of the sander. This makes sanding / polishing those big walls easier as you are able to attack a larger section of the wall at once. The base is designed to handle those big joints in plasterboard in one easy swipe.

DP-1000F Drywall sander with self-suction system

Dust extraction

The second major benefit of this drywall sander is the in-built dust extraction. This is designed to collect all those fine plasterboard dust particles away from the motor and then expel them into the attached dust collecting bag. This handy feature is what makes using an electric sander on plasterboard possible.

For some professional contractors who use the sanders more often, then prefer to attach the wall sander to a vacuum cleaner. Oboviously the vacuum cleaner has much more power to suck the dust, and the HEPA filter make the dust cleaning easier and faster.

DP-2000F Foldable dust-free drywall sander with LED light

THE POWER OF DUST EXTRACTION

Less mess

The added advantage of the in built dust extraction is that all that messy, hard to clean plaster dust is being cleaned as you work, minimising the mess and clean up time you’ll need to do when the job is done.

Cleaner,  healthier air condition

Drywall dust (or dust in general) can be harmful to inhale; when you’re sanding large areas manually all of that dangerous dust is kicked up into the air where you could potentially breath it in. Prolonged exposure to dust-filled air is even linked to an increased chance of developing asthma. By accumulating and storing the dust as you go the drywall sander creates cleaner air that is safer for you and everyone in the room.

TIPS FOR SANDING A DRYWALL

Get off to a fine start

It’s tempting to look at the large area and want to use a coarse paper to speed up your job, but most modern plaster is rather soft. Using a heavy-grit paper can potentially leave marks on your wall. Start fine and move to a coarser paper if needed.

Don’t push the dry wall sander with strong power, because strong power pushing will Shovel off the wall, that will make the wall uneven and ugly. Just grip the handle tightly, let the round pad moving slightly going round and round.

Fill In the gaps

Rather than trying to sand out any big ridges or gouges, it can be easier to and a coat of joint compound to even it out. This avoids the risk of over-sanding the areas surrounding the problem.

Shine a light on imperfections

Use a light to expose dings, pits and imperfections, circle them with a pencil as you go and then pick up your sander and re-sand any problem areas.

Prime time sanding

Many over eager beginners will skip sanding after priming but it’s a risky choice. Sanding after priming removes any fuzz or lumps that may cause unevenness in your paint job.

WHICH VACUUM CLEANER SHOULD I USE FOR DRYWALL SANDING?

When it comes to indoor construction, drywall sanding is among the messiest jobs. It can create a great deal of fine dust covering your work space, and on top of the obvious nuisance of cleaning it up, there’s also the health hazard these kinds of dusty environments can create for anyone working around the area. Traditional Shop-Vacs have long been the go-to, but are they really the best vacuum for the job? The short answer is no. Due to the nature of the paint on drywalls and the fine dust it creates, your average Shop-Vac’s filtration can experience quick burnout since their filter system clogs easily. Add to that, Shop-Vacs aren’t cut out to trap dust clouds while you’re working.

So which vacuum should you use in your drywall sanding job?  Here are some tips to make your job easier and safer than ever…

  • Choose an industrial vacuum cleaner that can attach to your wall sander tools such as sanding blocks, bazookas, and more. This will give you the peace of mind that fine dust will be removed directly from the sanding surface before it even has a chance at escaping into the open air.
  • Filtration matters. Clean filtration, 99% efficient @ 0.5 Micron captures fine without the hassle of clogs. Their long filter life also reduces expensive filter changes while keeping your vacuum’s performance top notch.
  • Look for an industrial vacuum that’s versatile. You’ll want a vacuum that’s powerful and efficient enough to pull off any point of source extraction, but also one that can be used for general housekeeping to get to hard to reach places when the dust really flies in all directions.
  • To keep workers safe from breathing in harmful materials, use a vacuum cleaner with HEPA filtration. This provides air purification so that only clean air is returned into the room while working.

Depending on the frequency you’ll be using the vacuum as well as the size of your dry wall sanding job, intermittent and continuous duty portable vacuums alongside central vacuum systems are capable of providing you with a dust-free solution. What’s important is understanding that handling drywall sanding dust properly is an investment that will keep workers safe, and provide a cost-effective decision in a dust removal remedy in the long run.

After sanding the drywall, use the high pressure paint sprayer airless pump to spray the paint onto the wall continiously and equally, the constent stable high pressure will atomize the paint into very tiny fog and apply onto the wall equallly. That sprayer is different from traditional air sprayer, we call this airless spray.

DP-506 Vacuum cleaner 38L for drywall sander

DP-506 Vacuum cleaner 38L with stainless steel tank

vacuum cleaner with water circulation

DP-506 connecting with drywall sander for construction work


         
  • Related products
  • Related posts
  • Comments
  • FAQ

All you need to know about the DP electric drywall sander !

1. What is an Electric Drywall Sander? While it’s not recommended that you take a standard palm or DA sander to drywall, there are some devices out there invented specifically to speed up the process of sanding drywall or plaster board. In general, ...
Read more

HOW TO USE A DRYWALL SANDER

BENEFITS OF THE DRYWALL SANDER As with any DIY job, having the right tool makes all the difference. The drywall sander has been specifically designed to tackle those big plasterboard walls. Benefits include smooth finishing, high efficiency, dustless...
Read more

Leave your comments

Name *

Mail (will not be published) *

Country *

FAQ regarding our business

Q1: What's your MOQ minimum order quantity for formal order?

A: Our MOQ is 10-100 units depends on the model. For small pump or spray guns , the MOQ is 100. and for large capacity pump, the MOQ could be 10. We can accept 1 or 2 units for sample testing order.

Q2: What's your payment terms?

A: We could accept L/C, T/T and Paypal or Western Union, also accept the payment against B/L copy . We can offer credit payment term for our long year cooperated representatives.

Q3: What is the lead time?

A: Sample order: 3-5days, mass production 20-40 days for the formal order.

Q4: Can we put our logo on your products? Is there extra charge for it?

A: Yes, we accept the OEM order based on the order quantity. The color box package need extra cost for less container order.

Q5: What's your warranty?

A: our warranty is 12months limited warranty except the easily worn parts. and for the motor we offer 2 years warranty.

Q6. Which port do you ship your machines?

A: We ship from Ningbo port China. for the FOB price, we will bear the local freight charge and the forwarder fee / customs fee, and all the shipping cost / insurance cost / forwarder cost at destination port / import duty tax ... all will be beared by the buyer (or importer).

Q7. how can i buy your products?

A: if you're final user, please leave your mobile phone number to us, and we will ask our distributor / dealer to call you directly. if you want to be our distributor or representative, welcome to contact us by email or whatsapp. we can talk more details one by one, we're sure you would be satisfied with our quality / service and price.

Inquiry

    * Your Name *

    Your Phone

    * Your Email Address *

    Your Country

    * Message *