CAFCO 300 fireproofing paint spraying screw pumps


FIREPROOFING COATING DESCRIPTION: 

CAFCO 300 is a durable, gypsum based, wet mix, commercial density Spray-Applied Fire Resistive Material designed to provide fire protection to concealed floor and roof assemblies, steel beams, columns, and joists in building construction projects. In addition to fire resistance, CAFCO 300 also provides thermal benefits. As a thermal insulator, it is effective in reducing heat loss, particularly when applied to the underside of a roof deck.  The R-value added by CAFCO 300 may also allow a reduction in roof insulation. CAFCO 300 is very cost effective; requiring less material to achieve required fire ratings and offers the best fire resistance performance per unit thickness in its class.

ADVANTAGES: 

  • Best fire ratings-minimal thickness
  • Lightweight gypsum based material is easy to apply
  • Provides additional value as a thermal insulator

 

And our DP-830 and DP-T3 are good choices to spray CAFCO 300 fireproofing coating.

DP-830 and DP-T3 Putty plaster screw pump are new, compact plaster spraying unit for all textured plasters, cement plaster, putty, gypsum etc with a grain size up to 3 mm, fillers and EIFS adhesives.

 

DP-830 cement plaster coating machine

Specifications:

Electricity / power: 220v 50hz / 60hz

Motor output – 1.8 kw

Max delivery rate – 12 litres per minute

Max operating pressure – 40 bar

Max grain size – 3mm

Max delivery radius – 30m  (horizonal),  or max.15m (height)

Hose length included in the package – 10 m (25*40mm)

Hopper capacity: 45 L

Net Weight: 42 kg

Gross Weight: 94kgs

Measurement: 120*65*90cm (wooden case package)

Nozzle size: 6 – 8 – 10 – 12mm four size available for different application such as putty, cement plaster, white cement, gypsum, lime based coating, texture etc. (only 2 nozzles are standard in the package)

DP 830 Plaster Spray System, Plaster Coating Machine

DP 830 Plaster Spray System, Plaster Coating Machine

 

DP-T3 texture putty plaster sprayer with screw pump

Specifications:

Electricity / power: 220v 50hz / 60hz

Motor output : 1.8 kw Brushless Motor

Max delivery rate : 12 litres per minute

Max operating pressure : 20 bar

Max grain size : 3mm

Max delivery radius :  20m (horizonal),  or max.10m (height)

Hose length included in the package: 7 m

Stainless steel Hopper capacity: 40 L

Net Weight: 35 kg

Nozzle size: 4-6 – 8 – 10mm four size available for different application such as putty, cement plaster, white cement, gypsum, lime based coating, texture etc. ( 6 nozzles are standard in the package)

Portable Type Texture Sprayer With Screw Pump, For Putty Plaster Spraying

Portable Type Texture Sprayer With Screw Pump, For Putty Plaster Spraying



Comments

Name *

Mail (will not be published) *

Country *

1+5=? Verification code *