Tips for Operating X-3 and X-6(H) Airless Paint Sprayers


Tips/Guidance for Operating X-3 and X-6(H) Airless Paint Sprayers are as below for users’ reference.

  1. X-3 / X-6(H) airless paint sprayers are with OILESS DESIGN(PATENTED), no need to additionally add lubricating oil into the piston pump.
  2. Pls clean the pump / hose / spray gun / spray tip throughly everyday when you finish your painting job.
  3. Recommended airless spray tip for X-3 is #517 and #517 for X-6(H).
  4. Standard Length as 7.5m and Max. Hose length as 15m.
  5. Pls refer to operation manual for demo videos for detailed reference.

DP-X6 Electric Airless Paint Sprayer 1.4L/min

DP-X3 DP-X6 Electric Airless Paint Sprayer

X-6H Electric Airless Paint Sprayer with High Cart

X-6H / X-3H Airless Paint Sprayer with High Cart


  • Related products
  • Related posts
  • Video
  • Comments

How to troubleshoot DP-X3 DP-X6 Airless Paint Sprayer

Pls follow below instructions to troubleshoot DP-X3 DP-X6 Airless Paint Sprayer. Problem Cause Solution Motor does not run: (verify sprayer is plugged in, and ON/OFF switch is on) Pressure control is set at zero pressure. Turn pres...
Read more

DP-X3 X6 Airless sprayer won’t PRIME

There is nothing more frustrating than your airless paint sprayer not working. The paint pump is the thing that is supposed to make your job easier. However it has to draw paint and prime properly before it can work.   Inlet Valve Ball (pa...
Read more

spare parts for X3 X6 electric airless sprayer pump

    Sparts Parts for X3/X6 Airless Paint Sprayer Parts No. Description QTY X5100a Left cover 1 X5100b Right cover 1 X5200 Front cover 1 X5300 Stand Assembly 1 X5301 Drip cup 1 ...
Read more

X6 airless sprayer for PPG JONMAT Premium Contract Matt emulsion

[embed]https://www.youtube.com/watch?v=TKXa6nol570[/embed] We tested our X6 airless paint sprayer with 519 tip size, for spraying the PPG JONMAT Premium Contract Matt Emulsion paint without water dilution, 32% volume solid. The spraying pressur...
Read more

Tips for Operating X-3 and X-6(H) Airless Paint Sprayers

Tips/Guidance for Operating X-3 and X-6(H) Airless Paint Sprayers are as below for users' reference. X-3 / X-6(H) airless paint sprayers are with OILESS DESIGN(PATENTED), no need to additionally add lubricating oil into the piston pump. Pls c...
Read more

HOW TO ASSEMBLE MY X3 X6 DIY AIRLESS SPRAYER

tools: cross point screwdriver, sharp vise, vise, allen wrench, Mobil EP0 grease, Mobil XHP 222 grease etc. sleeve coated with Mobil EP0 grease, that's very important. install v-packing on piston rod install v-packing and sleeve in by usin...
Read more

HOW TO DISASSEMBLE MY X3 AIRLESS SPRAYER

tools: cross point screwdriver, sharp vise, allen wrench, alcohol, cotton swabs etc. unscrew the nuts in front of cover by cross point screwdriver unscrew the nuts of motor cover by cross point screwdriver unplug puressure regulator connec...
Read more

Leave your comments

Name *

Mail (will not be published) *

Country *

7+7=? Verification code *

Inquiry

Your Name

Your Phone

Your Email Address

Your Website

Your Country

You Are

You want to use our paint sprayer for

What material do you spray?

Subject

Message