DP-K56 double diaphragm pump 56L/min big output capacity
This portable double diaphragm pump is designed to operate at low air pressure and ideal for transferring a wide variety of fluids.
Coating interface size: 3/4inch
Max. Air pressure range: 7bar
Liquid in and out size: 3/4″NPT
Air in and out size: 1/4″NPT
Min starting pressure: Planar valve: 1.6bar / Low pressure valve: 0.5bar
Max. Flow rate: 14.88G.P.M(56LPM)
Max. Gas Consumption: 380NL/Min
Max. Grain Diameter: 3mm
Suction Lift: 6.4M(wet); 3.7M(dry)
Diaphragm Diameter: 142mm
Carton Size: 53.5*40*25cm
* Could be used for both water-based or solvent-based, the membrane and all the o-rings in contact with fl uid are made of PTFE
* It’s ideal high quality surface finishing by using automatic or manual spray guns, With electrostatic systems, HVLP or conventional spraying units on wood, metal and plastic.
* Compact size, light weight, but very high flow rate
* Faster change-over speed, lower air consumption and low noise.
* Easy operation, and easy cleaning.
Language in: Russian