DP-AXP15 air-driven polyurea sprayer equipment

polyurea sprayer equipment

two components polyurea / roof insulation foam spraying equipment


* Powered by air compressor with max.8bar and 1cbm/min output

* This AXP15 is designed for polyurea spraying system.

* Bigger diameter air cylinder will generate bigger power and higher pressure, for polyurea spraying.

* More power heater will generate higher temperature for your polyurea spray jobs.

* Accurate temperature control and easy monitoring for result in good quality of sprayer material

* Stainless steel precise proportioning pump with long lifetime

* Innovated two-circuit heating pipes adopt the most advanced wrapping internal heating, it will maintain the required temperature and viscosity for the perfect components mixing ratio and finish.


Model No. DP-AXP15
Mode of driving Pneumatic (Air-driven)
Mixing volumetric ratio 1:1
Maximum output volume 6kgs/min (13 lbs/min)
Maximum temperature of fluid 90°C (194°F)
Maximum working pressure 170bar / 2500psi
Compressed air pressure 3-8bar (43-120psi)
Air consumption @7bar 1.2CBM/min
air compressor output: 1.4CBM/min
Heater power 11000W – 15000w
Maximum hose length 90m
Spraying materials: about 80-100 square meters per hour
Power parameters Single-phase 220V 50Hz 40A
Net weight 140kgs
Overall size 85cm x 65cm x 130cm
Packing dimension: 95cm x 75cm x 145cm
Contents in package:
Machine 1 set
Transfer pump 2 sets
Heating hose 15m (50ft)
Heating whip hose 1.5m (5ft)
Polyurea spray gun 1 set
Repair kit 1 set
Cleaning fluid 1 kg
DOP 1 kg


polyurea spray gunheating hose for polyurethane sprayer system

  • Related products
  • Related posts
  • Comments


  1. Steven Walker
    2017/05/04 at 12:49:41

    I am interested in prices and technical specs on 2 part foam and roofing sprayers, looking to replace mine asap!

  2. Victor campos
    2016/12/23 at 18:39:02


    Send quotation FOB.


    +507 667*****

  3. Jean-Claude Mercier
    2015/05/26 at 23:06:53


    How much there cost for this equipment? DP-AXP15 air-driven polyurea sprayer equipment

  4. sali
    2014/10/14 at 14:41:18

    Hi i look for polyurea tools

  5. Harry Van Hise
    2014/02/05 at 01:51:36

    Looking to buy spare parts for this machine to have on shelf

    Harry Van Hise
    813-735-9396 or email please

  6. loren kent
    2014/02/04 at 09:52:47

    I am looking for equipment prices?

  7. Denis
    2014/01/20 at 05:39:19

    We are interested in your equipment DP-FA20, DP-A20 PU, DP-AXP15.
    Can you ship to Russia, the cost of delivery, as well as their cost.
    Thanks for the reply.

  8. Brian Su
    2013/09/22 at 12:03:45

    I’m using polyfoam to carve sculpure i need to spray PU on it. Which machine do i need to? Send me a quotation. Thanks! From Brian Su.

    • jack
      2013/09/23 at 00:07:59

      hi Brian, thanks for your message.
      the model DP-A20 & FA50 are used for polyurethane foaming. they are designed for A -Isocyanate, & B -Polyol two components spraying.
      please confirm if these are the material you’re going to spray.

Leave your comments

Name *

Mail (will not be published) *

Country *

6+6=? Verification code *


* Your Name *

Your Phone

* Your Email Address *

Your Country

* Message *