MENU
Rate this post

Viscosity Chart

 

 

Instructions:
1 Begin with material and cup at room temperature (23.5±2℃).
2. Cover the drain hole with your finger and fill the cup with the materials
3. Quickly remove your finger and begin timing.
4. Stop timing when the steady stream first breaks at about 1 or 2 inches below the drain hole

 

 

 

 

 

The following liquids are shown with estimate Centipoise values. These values are influenced by various factors such as temperature, manufacturer, and batch quality control, etc. This should provide a good starting point for comparing to your material. All figures in the comparison chart above and the material chart below are estimated as close as possible when actual figures were not available.

Centipoise (approx.) Material at room temperature
2 Sulphuric acid
3 Acetone
4 Methyl ethyl ketone
5 Benzine
6 Xylol & toluol
10 Water & turpentine
16 Ethylene glycol
20 lemmer PNE Oil 2004
28 linseed oil raw
30 Lemmer PNE Oil 1994
64 Linseed oil (boiled)
65 SAE 10 Oil
100 Lemmer hydraulic oil 2004
120 Lemmer hydraulic oil 1994
125 SAE 20 oil
200 SAE 30 oil
240 Castor oil
250 10-30 oil
319 SAE 40 oil

The chart provides a guideline which will help you determine the viscosity of your material using common cup types. The chart is also useful in cross-referencing different viscosity cup results. For example, when a paint manufacturer recommends thinning to 25 seconds using a Dino 4 cup and you have a DIN cup, then you will have to thin to 21 seconds using the DIN cup.

Why are there different cups? their cup volume and hole size are designed to suit different material types. The two main cups for the commercial and industrial paint applications is the Dino 4 for America and the DIN cup for Europe. It does not matter which cup you choose but keep in mind the Dino 4 cup is produced in large volumes and comes in at a very reasonable cost.

Viscosity cup Dino-4 is used to measure the thickness of coatings. The first step when getting ready to spray with airless paint sprayer is to check the viscosity of the material and thin it if needed (check with the coating manufacturer for thinning recommendations).


         
  • Related products
  • Related posts
  • Comments
  • FAQ

Leave your comments

Name *

Mail (will not be published) *

Country *

FAQ regarding our business

Q1: What's your MOQ minimum order quantity for formal order?

A: Our MOQ is 10-100 units depends on the model. For small pump or spray guns , the MOQ is 100. and for large capacity pump, the MOQ could be 10. We can accept 1 or 2 units for sample testing order.

Q2: What's your payment terms?

A: We could accept L/C, T/T and Paypal or Western Union, also accept the payment against B/L copy . We can offer credit payment term for our long year cooperated representatives.

Q3: What is the lead time?

A: Sample order: 3-5days, mass production 20-40 days for the formal order.

Q4: Can we put our logo on your products? Is there extra charge for it?

A: Yes, we accept the OEM order based on the order quantity. The color box package need extra cost for less container order.

Q5: What's your warranty?

A: our warranty is 12months limited warranty except the easily worn parts. and for the motor we offer 2 years warranty.

Q6. Which port do you ship your machines?

A: We ship from Ningbo port China. for the FOB price, we will bear the local freight charge and the forwarder fee / customs fee, and all the shipping cost / insurance cost / forwarder cost at destination port / import duty tax ... all will be beared by the buyer (or importer).

Q7. how can i buy your products?

A: if you're final user, please leave your mobile phone number to us, and we will ask our distributor / dealer to call you directly. if you want to be our distributor or representative, welcome to contact us by email or whatsapp. we can talk more details one by one, we're sure you would be satisfied with our quality / service and price.

Inquiry

    * Your Name *

    Your Phone

    * Your Email Address *

    Your Country

    * Message *