MENU
4.4/5 - (76 votes)

X81L Professional Contractor Electric Airless Texture Sprayer

  • Model Number: X81L
  • Machine Power: Electric-powered
  • Motor power: 4.5KW
  • Motor type: Brushless motor
  • Pressure controlling: Electronic
  • Flow rate: 8.0L/min
  • Max. tip size: 0.045"
  • Max. hose length: 90m 295ft
  • Max.pressure: 227bar/3300psi
  • Spraying pressure: 200bar / 2900psi
  • Net weight: 56kgs
  • Gross weight: 71kgs
  • Package: Strong carton + plywood bottom
  • Measurement: 68*66*89cm
  • Container load quantity: 63sets
  • Worn parts: piston rod, o-rings, gaskets, ball and ball seat.
  • Warranty: 2 years for main components
putty sprayer, texture sprayer
X81L Electric Airless Texture Paint Sprayer 80L
8L airless sprayer for texture
X81L Professional Contractor Electric Airless Texture Sprayer

X81L is our most powerful electric airless texture sprayer piston pump with big output delivery 8.0L/min. It’s a good choice for professional contractors for all construction projects painting.
It could be used to spray whole range of primers and paints and heavy coatings like putty / texture / drywall mud etc.

Technical Data of the texture paint sprayer pump:

Model No. X81L
Pressure controlling Electronic
Voltage/Frequency 220V 50HZ
Motor power 4.5kw Brushless DC
Max. Flow rate 8.0L/min
Max. Tip size 0.045”
Max. Working pressure 228bar/3300psi

Features of X81 texture sprayer machine:

  • Smart Control with LED display.
  • Most reliable pump, durable piston rod and bushing ensures long lifetime.
  • Heavy-duty DP-6376G 500bar airless spray gun with gun filter inside.
  • 4.5kw Brushless motor, maintenance-free, it’s the most powerful electric airless texture sprayer.
  • Stainless steel fluid pump could be used for both oil-based and water-based paint spraying.
  • Easy out pump filter with inside-out design means less mess and clogging.
  • Support max. 0.045” wide range of tip sizes.

FAQ about X81L texture sprayer machine

how’s the texture machine packed?

it has durable corrugated carton which contains plywood base pallet, and plywood cover.

what’s the standard hose size in the package?

The standard hose size is 3/8*15m in the sprayer package. we could change to 1/2*15m with extra cost, and some clients want to put 30m longer hose with extra cost. so just tell us your requirement, we’ll make it as per your request.

what’s the materail of the wet components?

we use stainless steel or other special material which is guaranteed rust proof, and also resistant to thinner / chemical / acid etc.

what’s the material of the ball & ball seat?

We use Tungsten carbide ball & ball seat for ensure the longest lifetime and durability of the texture sprayer, while others use cheaper material.

The Tungsten carbide ball is much heavier than other material, so that it could seal the pump quickly as soon as the piston moves up or down, that means the spraying pressure will not drop down due to its quick action. The cheaper ball has less weight, and it acts slowly when the pressure drop down a lot!

How often should i clean the texture sprayer and filter?

The texture sprayer machine must be cleaner every day after you finish the painting job, if you leave the sprayer machine and material for over half day, we recommend you to put the spray gun into the water, then the material won’t get dried.

But don’t leave the machine to next day, it must be cleaner every day.

Before daily spraying job, remember to add the lubricating oil for prolong the lifetime of the v-packing.

The filters must be cleaner everyday also, which include the suction vilter, pump manifold filer, spray gun filter.

why my texture sprayer machine get over heated?

normally the sprayer machine is over heating due to:

  1. the electricity is not stable
  2. the connecting wire is too thin, or too long, or there’re 2 or more tools are using the same wire which will cause unstable electricity also. so if you connect this sprayer with 20m 30m long cable, please make sure it’s over 3*4 mm2.
  3. the spraying tip is too small for this big machine. If you keep use 0.013 0.015 0.017 0.019 small tip size for such a big machine, the motor can’t work full cycle smoothly and always forced no running and then it will easily get overheating due to its low speed. we recommend to use bigger tip size more than 0.025 inch. The motor is running and the fan is turning, then the heating is exhausted easily.

Learn how to chose the right spray tip size for your paint material

4.4/5 - (76 votes)

         

Video

  • Related products
  • Related posts
  • Comments
  • FAQ

Leave your comments

Name *

Mail (will not be published) *

Country *

FAQ regarding our business

Q1: What's your MOQ minimum order quantity for formal order?

A: Our MOQ is 10-100 units depends on the model. For small pump or spray guns , the MOQ is 100. and for large capacity pump, the MOQ could be 10. We can accept 1 or 2 units for sample testing order.

Q2: What's your payment terms?

A: We could accept L/C, T/T and Paypal or Western Union, also accept the payment against B/L copy . We can offer credit payment term for our long year cooperated representatives.

Q3: What is the lead time?

A: Sample order: 3-5days, mass production 20-40 days for the formal order.

Q4: Can we put our logo on your products? Is there extra charge for it?

A: Yes, we accept the OEM order based on the order quantity. The color box package need extra cost for less container order.

Q5: What's your warranty?

A: our warranty is 12months limited warranty except the easily worn parts. and for the motor we offer 2 years warranty.

Q6. Which port do you ship your machines?

A: We ship from Ningbo port China. for the FOB price, we will bear the local freight charge and the forwarder fee / customs fee, and all the shipping cost / insurance cost / forwarder cost at destination port / import duty tax ... all will be beared by the buyer (or importer).

Q7. how can i buy your products?

A: if you're final user, please leave your mobile phone number to us, and we will ask our distributor / dealer to call you directly. if you want to be our distributor or representative, welcome to contact us by email or whatsapp. we can talk more details one by one, we're sure you would be satisfied with our quality / service and price.

Inquiry

    * Your Name *

    Your Phone

    * Your Email Address *

    Your Country

    * Message *