DP-FA60 Two-component Sprayer equipment for both Polyurethane and Polyurea

DP-FA60 Polyurethane/Polyurea/Foam Insulation Sprayer equipment is specially designed for

professional polyurea spraying (or polyurethane spraying) that requires

higher pressure and higher temperature, and the sprayer equipment is pneumatic compressor powered/air-driven with digital system control and easy to operate.


Polyurea, Polyurehtane foam, 2-components spray, spouting, heat insulation, foam insulate packing,

PU foam filling jobs, tank and pip coating, roof insulation.

specially designed for  A. ISO  isocyanate ;  B. Polyol   two components mixing and spraying.


1. The spray gun has air auto-cleaning spray system, easy for use and easy cleeaning

2. The Foam / polyurea sprayer equipment system equipped with cart and big wheel, for easy moving

3. Stainless steel fluid transfer pump wet parts for corrosion-resistant,

with good quality PTFE v-packing included for less maintenance .

4. The polyurea spraying machine has total 16kw heater for fast heating and higher temperature(max.90 C degrees).

5. Easy reading control board for easy operating and working.

6. Transfer pump ratio for the sprayer is 8:3

7. Contents included in the package:

* Polurea/Polyurethane sprayer machine x 1

* Foam injecting / spraying 2 in 1 gun x 1

* TP3 Transfer pump x 2

* Heating hose x 15m

* Whip hose x 1.5m

* Repairing tools x 1set


Model No. DP-FA60
Mixing Volumetric Ratio 1:1 or 2:1
Max. Pressure 200bar / 2900psi
Max. Hose Length 90m
Max. Output Volume 9.5kgs(21 lbs/min)
Compressor¬†Output ‚Č•¬†1000¬†L/min
Compressor Pressure 10kgs (145psi)
Heater Power(watt) 16000w (6kw*2 heater + heating hose 3kw + 1kw for control system)
Heating Temperature 0-90 C degree
Measurement 91x91x135cm
Weight 210kgs
Voltage / Power 380V/50HZ,10500W/28A 220V/50/60Hz
Heated Hose+Whip Hose 15M + 1.5M


Control Board of DP-FA60

Control Board of DP-FA60










Front View of DP-FA60

Front View of DP-FA60









Polyurea Spray Gun

Polyurea Spray Gun














Details of DP-FA60 2-component Sprayer

Details of DP-FA60 2-component Sprayer










  • Related products
  • Related posts
  • Comments
  • FAQ


  1. Tony Battersby
    2016/08/03 at 07:58:17

    Hello, my name is Tony Battersby. We are looking to purchase a high pressure PU Foam machine that can also be used to mix and spray the materials to create a ployurea coating. It must be CE approved. It will be used to mix materials that can be sprayed at high pressure onto walls and roofs etc to provide insulation for buildings. Our intention is to use just one machine for both purposes (PU and polyurea). The machine needs to be portable, of a size that can be placed in the back of a van and transported to various sites to perform the work. If you can supply such a machine could you please send a picture and technical data sheet, along with a price and preferred payment method.
    Regards, Tony.

    2016/07/29 at 18:27:41

    polyurea equipment

    2016/07/29 at 18:26:40

    j’ai bien consulte votre site dont je vous remercie.
    Je suis intéressé pour commercialiser vos produit au Maroc
    je veux savoir le prix des appareils suivantes:
    DP HXP30
    Bonne reception

  4. Gilmar L Ferronato
    2016/07/08 at 00:47:54

    I would Info on the machine ‘s price DP-FA60 2-component Sprayer


  5. –ź–Ĺ–į—ā–ĺ–Ľ–ł–Ļ
    2016/02/22 at 14:15:26

    –ó–ī—Ä–į–≤—Ā—ā–≤—É–Ļ—ā–Ķ. –Į —Ā —É–ļ—Ä–į–ł–Ĺ—č. –ú–Ķ–Ĺ—Ź –ł–Ĺ—ā–Ķ—Ä–ł—Ā—É–Ķ—ā —Ü–Ķ–Ĺ–ĺ–ĺ–Ī—Ä–į–∑–ĺ–≤–į–Ĺ–ł–Ķ –Ĺ–į –ĺ–ļ—Ä–į—Ā–ĺ—á–Ĺ—č–Ķ –į–Ņ–Ņ–į—Ä–į—ā—č –Ī–Ķ–∑–≤–ĺ–∑–ī—É—ą–Ĺ–ĺ–≥–ĺ —Ä–į—Ā–Ņ—č–Ľ–Ķ–Ĺ–ł—Ź, —ć–Ľ–Ķ–ļ—ā—Ä–ł—á–Ķ—Ā–ļ–ł–Ķ. –ė –Ņ–Ķ–Ĺ–ĺ—É—Ä–Ķ—ā–į–Ĺ–ĺ–≤—č–Ķ —É—Ā—ā–į–Ĺ–ĺ–≤–ļ–ł –≤—č—Ā–ĺ–ļ–ĺ–≥–ĺ –ī–į–≤–Ľ–Ķ–Ĺ–ł—Ź

Leave your comments

Name *

Mail (will not be published) *

Country *

2+7=? Verification code *

FAQ regarding our business

Q1: What's your MOQ minimum order quantity for formal order?

A: Our MOQ is 10-100 units depends on the model. For small pump or spray guns , the MOQ is 100. and for large capacity pump, the MOQ could be 10. We can accept 1 or 2 units for sample testing order.

Q2: What's your payment terms?

A: We could accept L/C, T/T and Paypal or Western Union, also accept the payment against B/L copy . We can offer credit payment term for our long year cooperated representatives.

Q3: What is the lead time?

A: Sample order: 3-5days, mass production 20-40 days for the formal order.

Q4: Can we put our logo on your products? Is there extra charge for it?

A: Yes, we accept the OEM order based on the order quantity. The color box package need extra cost for less container order.

Q5: What's your warranty?

A: our warranty is 12months limited warranty except the easily worn parts. and for the motor we offer 2 years warranty.

Q6. Which port do you ship your machines?

A: We ship from Ningbo port China. for the FOB price, we will bear the local freight charge and the forwarder fee / customs fee, and all the shipping cost / insurance cost / forwarder cost at destination port / import duty tax ... all will be beared by the buyer (or importer).

Q7. how can i buy your products?

A: if you're final user, please leave your mobile phone number to us, and we will ask our distributor / dealer to call you directly. if you want to be our distributor or representative, welcome to contact us by email or whatsapp. we can talk more details one by one, we're sure you would be satisfied with our quality / service and price.


    * Your Name *

    Your Phone

    * Your Email Address *

    Your Country

    * Message *