Specifications of the DP-6376 airless sprayer gun
Large fluid passing way without filter inside for large output volume, less clog and higher efficiency, mainly used for big painting project.
Painting go through the tip nozzle directly, without touch to the needle or spring. Reduce the parts worn or rusting.
2-finger or 4-finger types are both available. (standard is 2 finger)
Max.pressure: 345bar / 5000psi
Outlet thread: 11/16″ or 7/8″.
Inlet connector: 1/4″NPSM, 1/4″PT, M16*1.5
Spray gun tip: 11.1mm or 11.4mm diameter
Aluminum gun body with confortable grip.
This airless spraying gun is specially for heavy paint like putty, plaster, epoxy, …. which require large tip size, and big follow without clog, no filtering.
The following charts will provide a guideline which should help you decide which tip size and filter is most appropriate for spraying different materials. Viscosity was measured using a standard viscosity cup……
- Related products
- Related posts