MENU
Rate this post

Types of Plaster Sprayers

Plaster spraying allows a plasterer to skim a drywall more than five times faster than using a hand float to apply it. Although classic gypsum-based plaster can be sprayed if it is “spray grade,” most plaster sprayers prefer the organic-based pre-mixed plaster packaged in a plastic bag because the plaster spraying machine does not need to be cleaned out after the job is finished, providing that plaster is kept moist. The pre-mixed plaster also has the advantage that any surplus can be recycled, almost eliminating waste, and plasterers do not need to haul water and mix the plaster from powder. A drywall skimmed with pre-mixed plaster can be painted in less than 24 hours, depending on the ambient temperature and humidity.

 

If you’re considering purchasing a plaster sprayer, then you’ll no doubt be wanting to know whether it’s worth the investment. What’s involved and how much time will it save are the questions that every professional plasterer wants to know the answers to, below are the plaster sprayer types for reference.

 

Four main types of plaster sprayers:

Pneumatic Sprayer (hopper sprayer gun DP-CH100)

Most common and simple to use. These sprayers have a hopper which holds the material which is connected to an air compressor. The air moves through the bottom of the hopper forcing the plaster out via the outputs on the wall. These tools generally are very simple to use, it only requires an air compressor and an air hose, and easy to clean and cheap price.

DP-CH100 can be used for applying plaster, small scale shotcrete, papercrete, earthen mixes and more. It can be used for plastering a stucco house, traditional plastering of stucco’s such as one coat or three coat stucco, GFRC, stamped concrete you can also use it for a stucco fence and also helps in building organic sculptures.

 

Item No.: DP-CH100

Recommended air compressor pressure: 6-8bar

Recommended Air compressor capacity: more than 600L/min air output, motor power 4-5.5kw

Carton box package.

N.W. 2.5kgs  Measurement: 83*31*29cm

Spraying distance to the wall: 30cm

Max. spraying volume: 25L/min

DP-CH100 Cement Mortar Plaster Hopper Sprayer

DP-CH100 Cement Mortar Plaster Hopper Sprayer

 

 

Screw pump (DP-T3 DP-T7 DP-N1)

These sprayers have a screw pump like DP-T3 DP-T7 DP-N1 that pumps the plaster up to a spray gun that has a large nozzle, usually 4 to 8 mm, that extrudes the plaster into a chamber on the end of the gun. In this chamber, compressed air is introduced to blast the plaster into a spray. Worm-drive pumps have a rubber stator which is not compatible with solvent-based materials.

DP-T3 DP-T7 DP-N1 Plaster Sprayer With Screw Pump is a new, compact texture spraying equipment unit equipped with Stainless steel hopper, for all textured plasters, cement plaster, putty, gypsum etc with a grain size up to 3 mm, fillers and EIFS adhesives.

Model No. DP-N1 DP-T3 DP-T7
Power (v/hz) 220V / 50hz 60hz 110V / 220V 50HZ 60HZ 220V 50HZ/60HZ
Motor power 1.3HP 1000W 2.4HP 1.8KW 2.8KW DC brushless motor
Output capacity 10-15L/min (2.6-4GPM) 12L/min (3.17GPM) 18L/min
Delivering pressure 20bar / 290psi 20bar / 290psi 30bar
Delivering height 3-15m (10-49ft) 10m 20m
Delivering distance 1-50m (164ft) 20m 30m
Nozzle size 4, 6, 8mm 4, 6, 8, 10mm 4, 6, 8, 10mm
Max. grain size 2-3mm 3mm 3mm
Tank capacity 25L 40L 40L
Feature for putty For putty plaster texture etc. For putty plaster texture etc.
NW/GW 115/140kgs 35kgs 45kgs
T3 texture sprayer equipment

DP-T3 portable texture plaster sprayer

DP-T7 screw pump for texture plaster spraying.

DP-N1 Putty Reboco máquina de pulverização, pulverizador da textura

DP-N1 putty plaster sprayer

 

Peristaltic pump (DP-TX450)

There are a few plaster sprayers that have a peristaltic pump which also requires compressed air to produce a spray. These types of plaster sprayer can also spray textured coatings with particle sizes up to about 3mm diameter, providing that they are not solvent based.

DP-TX450 is specially designed Peristaltic Pump for spraying texture, and also for all textured plasters, cement plaster, putty, gypsum etc with a grain size up to 3 mm, fillers and EIFS adhesives, etc.

 

Item No.: DP-TX450

Voltage / Frequency: 220v 50hz / 60hz

Motor: 1.8 kw DC Brushless Motor

Max. Delivery Rate: 8.0L/min

Max. Operating Pressure: 55 bar

Max. Grain Size: 3mm

Max Delivery Radius: max. 35m  (horizonal) or max. 30m (vertical height)

Hose length included in the package: 7m

Hopper Capacity: 50 L

Required Airless Compressor: 0.9CBM/7.5KW

Nozzle size: 4, 6, 8, 10mm four size available for different application such as texture, putty, cement plaster, white cement, gypsum, lime based coating, texture etc. (only 2 nozzles are standard in the package)

dp-tx450-texture-sprayer

DP-TX450 putty plaster texture sprayer

 

Piston pump (DP-6337iB)

Newer types of plaster sprayer have a piston pump, which has sufficient pressure to spray smooth (untextured) plaster without compressed air. Full airless sprayer piston pumps are sometimes used to spray smooth plaster, although they are not ideal as the flow rate is too low for volume projects; however, they can be used to spray solvent-based plasters, like DP-6337iB professional electric piston pump with 2500W brushless motor and low position suction valve long piston rod powerful for high viscosity paints materials painting.

Item No: DP-6337iB

Suction Valve: Low Position

Pressure Controlling: Digital + Electronical

Motor Power: 2500W (Brushless Motor)

Flow Rate: 7.0L/min

Max. Tip Size: 0.043″

Max. Pressure: 210bar

Max. Spraying Pressure: [email protected]″ , [email protected]

Wooden Case Size: 70*52*87cm

N.W/G.W.: 45/55kgs

With spray gun(1pc tip guard + 2pcs tip #531/#541), 3/8”NPSM*15m hose, 1/4”NPSM*1m whip hose.

DP-6337iB professional electric piston pump

 

The role of the pump is to drive the plaster into the hose in order to deliver a constant stream of plaster. Many professionals prefer to have an additional mixing machine on hand to ensure a constant flow of plaster to enable continual production.

 

Finishing

When the plaster has been sprayed on the wall or ceiling, it is laid off with a wide spatula, typically 40 cm wide. This can be mounted on a pole for finishing the ceiling.


         
  • Related products
  • Related posts
  • Comments
  • FAQ

Leave your comments

Name *

Mail (will not be published) *

Country *

FAQ regarding our business

Q1: What's your MOQ minimum order quantity for formal order?

A: Our MOQ is 10-100 units depends on the model. For small pump or spray guns , the MOQ is 100. and for large capacity pump, the MOQ could be 10. We can accept 1 or 2 units for sample testing order.

Q2: What's your payment terms?

A: We could accept L/C, T/T and Paypal or Western Union, also accept the payment against B/L copy . We can offer credit payment term for our long year cooperated representatives.

Q3: What is the lead time?

A: Sample order: 3-5days, mass production 20-40 days for the formal order.

Q4: Can we put our logo on your products? Is there extra charge for it?

A: Yes, we accept the OEM order based on the order quantity. The color box package need extra cost for less container order.

Q5: What's your warranty?

A: our warranty is 12months limited warranty except the easily worn parts. and for the motor we offer 2 years warranty.

Q6. Which port do you ship your machines?

A: We ship from Ningbo port China. for the FOB price, we will bear the local freight charge and the forwarder fee / customs fee, and all the shipping cost / insurance cost / forwarder cost at destination port / import duty tax ... all will be beared by the buyer (or importer).

Q7. how can i buy your products?

A: if you're final user, please leave your mobile phone number to us, and we will ask our distributor / dealer to call you directly. if you want to be our distributor or representative, welcome to contact us by email or whatsapp. we can talk more details one by one, we're sure you would be satisfied with our quality / service and price.