MENU
5/5 - (1 vote)

why my airless paint spray machine get over heating

Why does my airless paint sprayer get hot / over heating?

Question: when we start using 6337ib airless paint sprayer equipment,  suddenly the motor is getting heated , then we turn off and again start after 10 minutes and after running for 10 minutes it again gets heated.

Electric Airless Paint Sprayer for Spraying Putty PlasterDP-6337iB Electric Airless Piston Pump with brushless motor

Answer: there’re several possibility that the motor get over heating.

  1. The painter use too thin cable wire, or too long cable.  When you plug the paint sprayer machine into 220v voltage, after the long distance cable , the voltage could be as low as 180v or 150v. Too low voltage will get the motor heating too much.
  2. There are several other power tools or machines are plugged into same wire line.  When the other machines / tools are working, there must be voltage loss also,  the motor will also get heating due to the vibration of the electricity voltage.
  3. if the airless paint sprayer spraying at high pressure but with small tips, it will causes excessive heat build up. we recommend the user to chose right size tip for the relevant sprayer machine. if you are using a large pump, then you should use a large tip nozzle. if you are using a small paint sprayer, then use a small tip nozzle size but make sure the spraying pressure is over 100bar. If you don’t want to change to large tip size, then you can decrease the spraying pressure by regulating the pressure regulator.
  4. There’s another possibility, it’s rare but Maybe it happens.  the pressure sensor of the paint spray machine is damage, and you could find the max pressure (when the spray gun stopped spraying) of the pump is up to 300 bar or more. You should stop the spraying immediately, and replace the pressure sensor quickly.
  5. Be sure ambient temperature where the airless paint sprayer is located is no more than 90 degrees F and sprayer is not located in direct sun. The high ambient temperature would cause the motor over heated also. then you need Move sprayer to shaded, cooler area if possible.

 

Even the paint sprayer machine get over heating, you could be rest assured that the motor won’t get burnned. because we have the over heating protection for the 6337 sprayer brushless motor.

if the temperature is up to the setted temperateure, the motor will stop working quickly. You can restart the pump when the machine is cooled for several minutes.

 

welcome to talk to us if you have any other question for our airless sprayer machines.

below is the popular airless paint sprayers which are mass produced for worldwide clients

 

X51L Electric Airless Paint Sprayer
Motor power: 3000W/2600W Max. tip size: 0.037″(X41L 0.033″)
Max.pressure: 210bar/3045psi Flow rate: 5.1L/min/(X41L 4.0L/min)
X24 X28 electric airless sprayer X24 X28 Electric Airless Sprayer Similar To 495 595 For Contractors
Motor power: 1500W / 1700W Max. tip size: 0.023″ 0.025″
Max.pressure: 210bar / 3045psi Flow rate: 2.4L/min 2.8L/min
DP-X6 Electric Airless Paint Sprayer with Gun & Hose DP-X6 Portable Electric Airless Paint Sprayer 1.4L/Min
Motor power:  650W  Max. tip size:  0.019”
Max.pressure: 200bar/2900psi/20Mpa  1.4L/min 0.36gpm
X81L Electric Airless Texture Sprayer 8.0L X81L Professional Contractor Electric Airless Texture Sprayer
Motor power: 3KW Max. tip size: 0.045″
Max.pressure: 228bar/3300psi Flow rate: 8.0L/min

         
  • Related products
  • Related posts
  • Comments
  • FAQ

why my airless paint spray machine get over heating

Why does my airless paint sprayer get hot / over heating? Question: when we start using 6337ib airless paint sprayer equipment,  suddenly the motor is getting heated , then we turn off and again start after 10 minutes and after running for 10 minutes...
Read more

how to chose the airless paint spray tip size for your paint material

how to chose the airless paint spray tip size for your paint material? The following tables display several paint applications with suggested corresponding paint spray tips. These spray tip sizes are merely recommendations and popular in the market....
Read more

Leave your comments

Name *

Mail (will not be published) *

Country *

FAQ regarding our business

Q1: What's your MOQ minimum order quantity for formal order?

A: Our MOQ is 10-100 units depends on the model. For small pump or spray guns , the MOQ is 100. and for large capacity pump, the MOQ could be 10. We can accept 1 or 2 units for sample testing order.

Q2: What's your payment terms?

A: We could accept L/C, T/T and Paypal or Western Union, also accept the payment against B/L copy . We can offer credit payment term for our long year cooperated representatives.

Q3: What is the lead time?

A: Sample order: 3-5days, mass production 20-40 days for the formal order.

Q4: Can we put our logo on your products? Is there extra charge for it?

A: Yes, we accept the OEM order based on the order quantity. The color box package need extra cost for less container order.

Q5: What's your warranty?

A: our warranty is 12months limited warranty except the easily worn parts. and for the motor we offer 2 years warranty.

Q6. Which port do you ship your machines?

A: We ship from Ningbo port China. for the FOB price, we will bear the local freight charge and the forwarder fee / customs fee, and all the shipping cost / insurance cost / forwarder cost at destination port / import duty tax ... all will be beared by the buyer (or importer).

Q7. how can i buy your products?

A: if you're final user, please leave your mobile phone number to us, and we will ask our distributor / dealer to call you directly. if you want to be our distributor or representative, welcome to contact us by email or whatsapp. we can talk more details one by one, we're sure you would be satisfied with our quality / service and price.