DP-EP960 HOT Electrostatic Powder Coating Equipment for Metal Surface Finishing

      Electrostatic powder spray gun application uses a fluidized bed as a feed hopper to hold the powder and fluidize it so that it can be pumped to the tip of a spray gun using compressed air for transport from the feed hopper to the gun tip.

      This electrostatic powder gun is widely used in the home appliances, hardware, security door (window), fins, architectural, auto parts, sports equipment, medical equipment, aluminum and other industries etc.


      DP-EP960 Specifications:

      1.     DP-EP960 equipped with the most advanced electrostatic generator in the world  to produce the best finish. 

      2.     It’s quite good to spray the hard working place or the angle of the corner (dead angle).

      3.     Automatic feedback: according to the distance between the workpieces and the needle of the spray gun, high-voltage electrostatic automatic tracking, high painting rate of the powder (low powder consumption), and the current are automatically adjusted to keep the electrostatic energy in the optimal state to overcome the “shielding effect” quick color change.

      4.     save powder material, easy to operate and high efficiency.

      5.     reliable and durable

      6.     Good permeability

      7.     uniform powder thickness

      8.     Produce Superior finish, without dust spots.

      9.     Special nozzles can be customized according to customers’ demands to achieve the best finish. 


      technical data:

      Electronic control system

      Built in electrostatic spray gun

      Air control system

      Input voltage: 220VAC

      Input voltage: 12V

      Solenoid valve voltage: 24VDC

      Input frequency: 50Hz

      Input frequency: 20KHz

      Input air pressure: 5.5-8bar

      Input power: 46W

      Input current: 1A

      Compressed air moisture: ma* 1.3/NM3

      Output voltage: 12VDC

      Output voltage: -100KVDC

      Compressed air oil: ma*0.01g/NM3

      Output current: 0.1A-0.7A

      Output current: 0-100UA

      Air flow: ma* 19g/NM3

      Valve controlled voltage: 24VDC

      Connecting cable: 4.5M


      Input cable: 2.5M



      Spare parts inside:

      Machine: 1set

      Spray gun: 1pc

      Flat nozzle: 1pc

      Silicone powder tube: 1pc

      Large flow pump: 1pc

      Connecting PU tube: 1pc

      Stainless steel powder bucket: 1pc

      Electrode set: 1pc

      Large, medium and small nozzle: per 1pc

      Ground wire: 1pc


      Extension pole: 1pc

      • Related products
      • Related posts
      • Video
      • Comments

      Leave your comments

      Name *

      Mail (will not be published) *

      Country *

      0+2=? Verification code *


      Your Name

      Your Phone

      Your Email Address

      Your Website

      Your Country

      You Are

      You want to use our paint sprayer for

      What material do you spray?