MENU
3.6/5 - (17 votes)

DP-830 Plaster Spray System, cement plaster coating machine

plaster sprayer equipment

cement plaster sprayer equipment

 

Cement mortar sprayer 2.4HP 1800W

Cement mortar sprayer 2.4HP 1800W

The DP 830 Putty plaster sprayer is a new, compact plaster spraying unit for all textured plasters, cement plaster, putty, gypsum etc with a grain size up to 3 mm, fillers and EIFS adhesives.

Specifications of 830 Plaster Spray Machine, cement plaster coating machine:

Electricity / power: 220v 50hz / 60hz
Motor output – 1.8 kw
Max delivery rate – 12 litres per minute

Max operating pressure – 40 bar
Max grain size – 3mm
Max delivery radius – 30m  (horizonal),  or max.15m (height)
Hose length included in the package – 10 m (25*40mm)

Hopper capacity: 45 L

Hopper Material: Stainless Steel

Control Method of Spray Gun: Electrical Control

Net Weight – 42 kg

Gross Weight – 94kgs

Measurement. 120*65*90cm (wooden case package)

Nozzle size: 6 – 8 – 10 – 12mm four size available for different application such as putty, cement plaster, white cement, gypsum, lime based coating, texture etc. (only 2 nozzles are standard in the package)

Features of 830 Plaster Spray equipment, cement plaster coating machine:

Container: low weight, and easy to clean, flexible, weatherproof and resistant to ageing.
Materials: Handing materials with a grain size up to 3 mm.
Motor: The new powerful servo motor achieves high torques to ensures good performance, and very low noise.

Stainless steel bucket is more durable than wagner plastic hopper.

The durable screw pump could be used for 5000 – 10000 square meters for putty plaster material
Place: suitable for use in the small commercial sector as well as for large projects.

This DP830 plastering machine is ideal for putty / cement plaster / lime based plaster / texture spraying for indoor and outdoor wall finish.

The spare parts are changable with original PC830 plastering pumps.

Applicable Coatings of DP830 Plaster Spray Machine, cement plastering machine as below :

  • Thermal insulation composite system bonding agent(mineral and artificial systems).
  • Artificial resin plaster up to 3mm granular size.
  • Silicate plaster up to 3mm granular size.
  • Silicone resin plaster up to 3mm granular size.
  • Mineral final coats up to 3mm granular size.
  • Lightweight plaster systems up to 3mm granular size.
  • Scraped stucco up to 3mm granular size.
  • Thermal insulation plasters.
  • Restoration plaster.
  • Porous concrete coating.
  • Quartz plastic.
  • Roof coatings.
  • Fire protection coatings.
  • Mineral sealing sludges.
  • Bitumen emulsions.
  • Armoring filler.
  • Liquid wood-chip wall paper.
  • Casement grouting mortar.
  • Artificial resin rendering base.
  • Wash primer.
  • Elastic coating.
  • Acoustic plaster, artificial resin bonded.
  • Fillers, artificial resin bonded.

 

DP-830 Cement Mortar Sprayer Spray Gun

DP-830 Cement PLASTER Spray Gun

3.6/5 - (17 votes)

         
  • Related products
  • Related posts
  • Comments
  • FAQ

9 comments

  1. RUSSELL
    2017/01/24 at 02:21:40

    Hi could you please send me a price on your texture gun DP 830 + shipping to Australia
    Thank you
    RUSSELL

  2. Somkid Chai-amnuaypornkun
    2016/11/07 at 23:30:50

    Dear Sir,
    I interested DP830 and DP-N6M.Please send specification and price list to me urgently,my contractor need it.
    Thank you&Best regards,

  3. Somkid Chai-amnuaypornkun
    2016/11/06 at 09:05:47

    Dear Sir,
    I interested for DP830 and DP-N6M please send specification and price list to me

  4. Alon
    2016/09/21 at 23:03:14

    Hi
    Can you give price of machine/ shipping to Ashdod port, Israel ?
    Thank you very much
    A. Kunigis

  5. Peter Torok
    2016/08/22 at 06:01:13

    I am interested in the texture spray gun that you show in the picture “DP-830 Cement Mortar Sprayer Spray Gun” could you please put me in contact with a supplier for Australia, Brisbane. If you dont have a supplier please let me know how much the gun is to purchase from you direct.
    Regards
    Peter Torok
    61 411 304 794

  6. Edidiong Akpe
    2016/07/16 at 20:18:12

    Dear Sir,
    Pls send me quote with shipment cost to Nigeria by sea

  7. Manoranjan Nandi
    2015/12/12 at 07:48:15

    Dear Sir / Madam,

    We are from Kolkata City, India, and looking for Mortar spraying machine for wall plastering, ceiling plastering etc
    With (sand + cement + water) as plastering materials.

    We wanted with single phase 220 V power supply so that the machine can be used in all site. However in case you do not have with single phase power supply then 3 phase ,440 V , 50 Hz. Is our supply.

    We request you to give the details and price for all the models so that we can select from the list. We are searching for 20 to 25 L/Min flow of plastering material.

    Please reply and give your price to your any nearest China port. I will find out the shipment from your port to our port

    I was thinking for DP-830 model will be economic and best, However you can guide me.

    I am eagerly waiting for your offer.

    Thanks and Regards,

  8. KHALED
    2015/12/01 at 08:47:13

    I’m looking for list prices for cement plaster sprayer equipment (machine)

  9. Edidiong Akpe
    2015/09/25 at 01:30:17

    Pls send me your quote for sample order with shipment cost to Nigeria by sea

Leave your comments

Name *

Mail (will not be published) *

Country *

FAQ regarding our business

Q1: What's your MOQ minimum order quantity for formal order?

A: Our MOQ is 10-100 units depends on the model. For small pump or spray guns , the MOQ is 100. and for large capacity pump, the MOQ could be 10. We can accept 1 or 2 units for sample testing order.

Q2: What's your payment terms?

A: We could accept L/C, T/T and Paypal or Western Union, also accept the payment against B/L copy . We can offer credit payment term for our long year cooperated representatives.

Q3: What is the lead time?

A: Sample order: 3-5days, mass production 20-40 days for the formal order.

Q4: Can we put our logo on your products? Is there extra charge for it?

A: Yes, we accept the OEM order based on the order quantity. The color box package need extra cost for less container order.

Q5: What's your warranty?

A: our warranty is 12months limited warranty except the easily worn parts. and for the motor we offer 2 years warranty.

Q6. Which port do you ship your machines?

A: We ship from Ningbo port China. for the FOB price, we will bear the local freight charge and the forwarder fee / customs fee, and all the shipping cost / insurance cost / forwarder cost at destination port / import duty tax ... all will be beared by the buyer (or importer).

Q7. how can i buy your products?

A: if you're final user, please leave your mobile phone number to us, and we will ask our distributor / dealer to call you directly. if you want to be our distributor or representative, welcome to contact us by email or whatsapp. we can talk more details one by one, we're sure you would be satisfied with our quality / service and price.

Inquiry

    * Your Name *

    Your Phone

    * Your Email Address *

    Your Country

    * Message *