DP-N10 Cement Mortar Grouting Machine
DP-N10/DP-N10C/DP-N10MC Cement Mortar Grouting Machine is specialy designed for cement mortar/concrete grouting with high efficiency. DP-N10 is without air compresssor or mixer, DP-N10C is with air compressor while without mixer, DP-N10MC is with both air compressor and mixer.
Specially designed for grounting cement mortar, widely applied for construction projects like
secondary grouting for the channels, cement mortar grouting for slope geotechnical
engineering, prestressing duct grouting, water curtain consolidation grouting, void
grouting for soft foundation and concrete pavement slab bottom, and interior/
exterior wall painting, etc.
1. Output volume adjustable (lower/high speed)
2. Equipped with vibration screen.
3. With remote control function.
4. With durable screw pump.
5. Control box: the core of the machine, to drive the motor, air & water pump.
6. Safety cover & quick unpack gear & material hopper: the material can be unpack
by the gear on the net cover, and be even poured into the tank.
7. Quick snap: easy to fix the material hopper and the cart.
8. 6.5/8KW motor & retarder: to drive the twister for material transportation.
9. Stirrer tank: quick and even mixing material.
10. Water inlet: lead water into the machine from outside.
11. Spinning Form Twister & Screw Pump: the material will be transport to the outlet by
the screw pump after the quick and even mixing by twister.
12. Pressure controller: to adjust the pressure of the mortar pipe to avoid the suddenness
13. Mortar pipe connector: very easy to connect with the machine.
Voltage/Frequency: 380V/50Hz 3-phase
Motor Power: 6.5/8KW two level adjustable, variable speed (lower/high)
Pump Delivery Capacity: 150L/min
Hopper Volume: 160L
Max. Working Pressure: 25bar
Delivery Distance: 1-30m
Cement Mortar Size: <7mm
Mixer Capacity(for DP-N10MC): 120L
Mixer Power(for DP-N10MC): 3kw
Overall Demension: 244×91×145cm
Standard Accessories for N10:
Φ32mm*10m mortar hose 1pc
Φ13mm*10m air hose 2pcs
Repair kit 1set